The optimal network design for knowledge sharing in a supply chain for horizontal integration

Document Type : Research Paper

Authors

Assistant Professor, Department of Industrial Engineering, Faculty of Engineering, Bu-Ali Sina University, Hamedan, Iran

Abstract

Integrating is one of the steps that creates cooperation among supply chain members and improves the performance of the chain of custody to reduce the impact of whipping. Knowledge sharing among the members of a chain level is one of the strategic level partnerships that strengthen the integration in the chain. For this purpose, the most important step is to find the best knowledge sharing network among the members of the chain, so that the minimum cost can be incurred for the collaboration of members and the exchange of knowledge among them will be maximized. This paper presents a new mixed integer programming model on the basis of which a certain problem was formulated and implemented for the level of producers in a dairy supply chain. By sensitivity analysis, the parameters affecting the knowledge sharing network were identified. One of these important parameters is the distance between companies. Another one is the ability to exchange knowledge of companies that affects the duration of the sharing process. The findings of the study provide managers with the necessary insight regarding the resource constraints, market conditions, and the objectives of the companies. This helps them make the best decisions regarding the integration of the supply chain through knowledge sharing.

Keywords


  1. Ali, M. H., Tan, K. H., Makhbul, Z. M., Abdul Hafaz Ngah, A. H., (2016), “Augmenting Halal Food Integrity through Supply Chain Integration”, Jurnal Pengurusan (UKM Journal of Management) 8, 1-17.
  2. Amjad Hussain, S., (2017) "How to make knowledge resources valuable: An insight of knowledge integration process analysis", VINE Journal of Information and Knowledge Management Systems 47(1), 42-54.

2.Bagchi, P. K., Ha, B. C. (2005). Supply chain integration: a European survey, The International Journal of Logistics Management 16(2), 275-294.

  1. Bahinipati, B.K., Kanda, A. Deshmukh, S.G. (2009). "Horizontal collaboration in semiconductor manufacturing industry supply chain: An evaluation of collaboration intensity index", Computers & Industrial Engineering 57, 880–895.
  2. Cooper, M.C., Lambert, D.M., Pagh, J.D. (1997). “Supply chain management: more than a new name for logistics”, The International Journal of Logistics Management 8(1), 1-14.
  3. Danskin, P., Englis, B. G., Solomon, M. R., Goldsmith, M., Davey, J. (2005). "Knowledge management as competitive advantage: Lessons from the textile and apparel value chain", Journal of Knowledge Management 9(3), 91–102.
  4. Dezfoulian, H.R., Afrazeh, A., Karimi, B., (2017), A new model to optimize the knowledge exchange in industrial cluster: A case study of Semnan plaster production industrial cluster, Scientia Iranica E, 24(2), 834-846.
  5. Dong, S., Johar, M., Kumar, R. (2012). "Understanding key issues in designing and using knowledge flow networks: An optimization-based managerial benchmarking approach", Decision Support Systems 53, 646–659
  6. Gold, A.H., Malhotra, A., Segars, A.H. (2001). "Knowledge management: an organizational capabilities perspective", Journal of Management Information Systems 18(1), 185–214.
  7. Gordon, D. V., Maurice, S., (2015), “Vertical and Horizontal Integration in the Uganda Fish Supply Chain: Measuring for Feedback Effects to Fishermen”, Aquaculture Economics & Management 19, 29-50.

10. Haji karimi, A.A., Mansorian, T., (2013), “Investigating the Role of Customer Knowledge Management in Organizational Performance Improvement”, Journal Management System, 4(8), 75-92.

11. Hakkinen, L., Norrman, A., Hilmola, O.P., Ojala, L., (2004), “Logistics Integration in Horizontal Mergers and Acquisitions”, The International Journal of Logistics Management 15(1), 27 – 42.

12. Hingley, M., Lindgreen, A., Grant, D.B., Kane, C. (2011). “Using fourth-party logistics management to improve horizontal collaboration among grocery retailers”, Supply Chain Management: An International Journal 16(5), 316–327.

13. Jamali, Gh., Fallah, M., (2017), “Agility of the Supply Chain in the Businesses that Technically Support the Iranian Oil and Petrochemical Industries”, Journal Management System, 9(17), 31-53

14. Jun, M., Wei-zhou, Z. Yan, C. (2007). “An Analysis of Factors Affecting Knowledge Transfer Cost Based on Knowledge Transfer Context”, Journal of Beijing Technology and Business University (Social Science) 22(3). (In Chinese).

15. Kamal, M. M. Irani, Z. (2014). “Analysing supply chain integration through a systematic literature review: a normative perspective”, Supply Chain Management: An International Journal19 (5/6), 523–557.

16. Khamseh, H. M., Jolly, D. R. (2008). “Knowledge transfer in alliances: determinant factors”, Journal of Knowledge Management 12(1), 37 – 50.

17. Lee, H.L. (2000). “Creating value through supply chain integration”, Supply Chain Management Review 4(4), 30-36.

18. Lee, H.L., Padmanabhan, V., Whang, S. (1997). “Information distortion in a supply chain: the bullwhip effect”, Management Science 43(4), 546-558.

19. Manning, L., Baines, R.N. (2004). “Globalisation: a study of the poultry-meat supply chain”, British Food Journal 106(10/11), 819–836.

20. Manrodt, K.B., Holcomb, M.C. and Thompson, R.H. (1997), “What is missing in supply chain management?”, Supply Chain Management Review 1(3), 80-86.

21. Martinkenaite, I. (2012). “Antecedents of knowledge transfer in acquisitions”, Baltic Journal of Management 7(2), 167-184.

22. Mason, R., Lalwani, C. Boughton, R. (2007). “Combining vertical and horizontal collaboration for transport optimization”, Supply Chain Management: An International Journal 12(3), 187–199.

23. Mentzer, J.T., Dewitt, W., Keeber, J.S., Min, S., Nix, N.W., Smith, C.D. and Zacharia, Z.G. (2001). “Defining supply chain management”, Journal of Business Logistics 22(2), 1-25.

24. Moutaoukil, A., Derrouiche, R., Neubert, G. (2012). “Pooling supply chain: literature review of collaborative strategies”, Collaborative Networks in the Internet of Services, Springer, Berlin Heidelberg, 513-525.

25. Nagurney, A. (2009). “A System-Optimization Perspective for Supply Chain Network Integration: The Horizontal Merger Case”, Transportation Research E 45, 1-15.

26. Pellinen, J., Teittinen, H., Järvenpää, M., (2016) "Performance measurement system in the situation of simultaneous vertical and horizontal integration", International Journal of Operations & Production Management 36(10), 1182-1200.

27. Polyani, M., (1996). The tacit dimension, London, Routledge & Kegan Paul.

28. Pomponi, F., Fratocchi, L. Tafuri, S. R. (2015). “Trust evelopment and horizontal collaboration in logistics: a theory based evolutionary framework”, Supply Chain Management: An International Journal 20(1), 83 - 97.

29. Prakash, A., Deshmukh, S.G. (2010). “Horizontal collaboration in flexible supply chains: a simulation study”, Journal of Studies on Manufacturing 1(1), 54-58.

30. Schmoltzi, C. Wallenburg, C.M. (2012). “Operational governance in horizontal cooperations of logistics service providers: performance effects and the moderating role of cooperation complexity”, Journal of Supply Chain Management 48(2), 53-74.

31. Schulz, S.F., Blecken, A., (2010), “Horizontal cooperation in disaster relief logistics: benefits and impediments”, International Journal of Physical Distribution & Logistics Management 40(8/9), 636-656.

32. Simatupang, T.M. Sridharan, R. (2002). “The collaborative supply chain”, International Journal of Logistics Management, Vol. 13 No. 1, pp. 15-30.

33. Spens, K.M. Bask, A.H. (2002), “Developing a framework for supply chain management”, International Journal of Logistics Management 13(1), 73-88.

34. Tyndall, G., Gopal, C., Partsch, W., Kamauff, J. (1998). “Super-Charging Supply Chains: New Ways to Increase Value through Global Operational Excellence”, Wiley, New York, NY.

35. Wallenburg, C. M. Raue, J. S., (2011), “Conflict and its governance in horizontal cooperations of logistics service providers”, International Journal of Physical Distribution & Logistics management 41(4), 385-400.

36. Wang, C., Fergusson, C. Perry, D., (2008), “A conceptual case-based model for knowledge sharing among supply chain members”, Business Process Management Journal 14(2), 147-165.

37. Wang, S. Archer, N. (2007). “Business-to-business collaboration through electronic marketplaces: An exploratory study”, Journal of Purchasing & Supply Management 13, 113–126.

38. Wilhelm, M.M. (2011). “Managing coopetition through horizontal supply chain relations: Linking dyadic and network levels of analysis”, Journal of Operations Management 29, 663–67.